Silca Chain Waxing System

The Ultimate Chain Waxing System is your compact at-home kit for immersive waxing of chains. The wax warmer, drip stand, and cable coupler are included to make you ready-to-roll for having the cleanest, quietest and most efficient drivetrain possible. 

The wax melter has a vented clear lid to retain heat while being able to verify the wax is fully melted.  Perfect companion for StripChip to wax your chain in a single, no degreaser, step.

For ultimate accuracy Silca use a PID controller rather than a thermostatic one. This means they are only heating the wax to the specified temperature to not risk overheating that can occur with a standard crock pot style heater. Due to this more precise control, it is advised to heat to 125c to speed up the melting process and drop to 75c for waxing as the wax is getting heated. This will create the fastest time to application available.

The chain hanging stand allows for a no mess drying period where you can allow excess wax to drip right back into the pot to use for the next application.  The notched base retains the melter in place and holds the chain coupler securely in place.  

The chain coupler has a steel cable that is threaded on one side allowing it to be looped through your chain and secured on the other side.  Dip your chain in the wax, agitate, and hang all without getting wax anywhere you don't want it or touching a pot of hot wax.

• Cable Coupler
• Drip Stand
• Electric Wax Warmer
• 600ml wax capacity
• Temperature Range: 75-125ºC
• 14" x 8.5" x 9"
• North American Plug
• 120V
• NOTE: System Does NOT Include Wax